Cannon Mini Mag DR Manual?

[SuperD]

Anybody have an old Cannon Mini Mag that they still have the manual for? I'm looking for what amp breaker they recommend. If memory serves me, I think it is 20a. I know the Mag 5 HS and Mag 10 HS are 30a. I'm helping a guy set up his riggers this weekend and I want to make sure we use the right breaker size. Thanks!

 

[Pogue]

Did a quick search and found these links - hope they help!

Rob

http://www.ifish.net/board/showthread.php?t=250083

http://www.fish307.com/mini-mag22006andolder.aspx

 

[Mark McWillis]

SuperD,

My Scotty 1106's are 30a.

 

[SuperD]

Did a quick search and found these links - hope they help!

Rob

http://www.ifish.net/board/showthread.php?t=250083

http://www.fish307.com/mini-mag22006andolder.aspx

Thanks Rob,
The second link shows a 10a fuse at the motor. I know it should be higher than that. Unless someone can bail me out with a manual or owns one, I start with the 20a and see what happens.

 

[Full_Monte]

SuperD,

My Scotty 1106's are 30a.

Hmm...my Scotty 1106 riggers are 10A. I wonder why the difference.

 

[SuperD]

F_M, I think there are 2 different fuses used to protect the downrigger. The 10a is the fuse for the switch. The owners manual also calls for a line fuse that probably protects the circuit (wire).

 

[Bduck]

Dave- My Walkers use a 20A. Don't know if that helps.

 

[Full_Monte]

F_M, I think there are 2 different fuses used to protect the downrigger. The 10a is the fuse for the switch. The owners manual also calls for a line fuse that probably protects the circuit (wire).

I'm not sure if that makes sense. I have a 10amp fuse in each line close to the + side of the battery. What good would a 30amp do beyond that? I've never heard of two fuses/breakers being used in series.

 

[SuperD]

Monte, check out page 6 of the attached Scotty Owners manual.

http://www.scotty.com/scotty-support/documents/ED_ManualRev1007.pdf