Scenting options
I for one do not scent my squid bodies; I have found that doing so causes two problems. One, it causes them to deteriorate rather quickly and Two it’s pretty messy. When your running multiple lines and changing stuff out, it doesn’t take long and you have scent on everything in the boat. Three options:
1.) If using a squid/blade combo I put the scent on the rear down bill side of the blade. While the blade swings from side to side it leaves a wider scent trail that the squid runs through.
2.) I take a piece of clean chamois cloth and cut 1” strips off of it, then I cut those into 1/4” - 3/16” wide strips. So they are 1” long 1/4” – 3/16” wide. Then I cut them into either maggot shapes or squid shapes. Attach them to the trail hook on your squid, wet them in the water then scent them. When I’m done they go in the garbage. They work like a charm.
3.) Get the scent dispenser from pro-cure and attach them behind your cannonball.
Hope this helps.