Mad Cow?

[SuperD]

Anyone like the madcow lure? I tried making my own and this is how it turned out.

 

[SuperD]

I also tried my own version of splatter pink.

 

[Kokaholic]

Not a bad mad cow. Put that behind our RMT Mad cow dodger and that should ROCK!!!101chromefish101

 

[eenakoK]

Looks good! I would think those would catch a fish or two! thumbsup

 

[Cariboospeed]

Oooowww, I like that one!

 

[LILFISHER]

Look great! where do you get your blades and components? LIL

 

[SuperD]

Look great! where do you get your blades and components? LIL

Jannsnetcraft for blades and clevises. Beads are either Radical Glow or base white that I get at Michael's and paint myself.

 

[Bduck]

I hope you got plenty of new stuff to try out here Dave. Your time to arrive is almost here. signfishin

 

[SuperD]

Roger, if you were a good host, you'd have it dialed in and tell me what I need to make the most of. BTW, I've made something special, just for you!

 

[SilverBullets]

Those spinners look good Dave...did you do the splatter paint on those blades or buy em like that?

 

[SuperD]

Gary, I experimented with a few different items to get my own splatter pattern. What I ended up with was one of those coarse sponges used for sponge painting a wall. I'd dab the sponge in the paint and then sponge the excess paint off on a piece of cardboard until I got the look I wanted. Then I'd lightly hit the blades. If that hadn't worked, my next step was to try blowing it through a coffee swizzel stick.

 

[SilverBullets]

Gary, I experimented with a few different items to get my own splatter pattern. What I ended up with was one of those coarse sponges used for sponge painting a wall. I'd dab the sponge in the paint and then sponge the excess paint off on a piece of cardboard until I got the look I wanted. Then I'd lightly hit the blades. If that hadn't worked, my next step was to try blowing it through a coffee swizzel stick.

Now THAT"S a good idea...I like the way you think!!101goodpost101

 

[Fishon18]

Very creative SD and thanks for sharing.

 

[GVF]

Dave try holding a spray paint can kinda far from the blade and try to push the nozzle not fully down

Heres a mad cow I did in 2007